Posts

A fall arrest harness is the body-supporting part of a personal fall-arrest system. Its fit, attachment points and compatibility with the connecting equipment all matter. This guide explains the main harness features and gives an example from Trans-Web’s Lite range.

What is a Fall Arrest Harness?

A full body fall arrest harness uses straps, buckles and designated attachment points to support the wearer and distribute forces when a complete fall-arrest system stops a fall. Wearing a harness alone does not prevent a fall or provide a complete fall-arrest system.

Key Features of Fall Arrest Harnesses

Shoulder and Leg Straps

Adjustable straps help the wearer achieve the fit specified in the manufacturer’s instructions. Size, adjustment and comfort should be considered together when comparing harnesses.

Padding varies by model. For example, the Lite Padded Full Body Harness includes a breathable shoulder pad, colour-coded webbing and an adjustable fit. It is manufactured in the UK by Trans-Web and is available in S-L and XL+ sizes, with a quick-lock buckle option. Its product page includes specifications, supporting documents and a quotation form.

Chest and Back Connection Points

Attachment points vary between harness models and may use textile or metal components. Check the individual product instructions to identify the points designated for fall arrest and the compatible connecting equipment. Do not assume that every ring or loop has the same purpose.

Lanyard and Energy Absorber

The harness is one component of the system. Connecting equipment links it to a suitable anchorage, and the fall-arrest system must include a suitable means of absorbing energy and limiting the forces applied to the wearer. A lanyard or energy absorber should not be assumed to be included with a harness; check what is supplied with the selected product.

Functions of Fall Arrest Harnesses

Supporting the Wearer

The full body harness supports the wearer as part of the fall-arrest system. It should not be described as a general balance aid or treated as a substitute for preventing falls where this is practicable.

Fall Arrest Capability

Stopping a fall depends on the complete system, including the harness, compatible connecting equipment and anchorage. The harness alone does not absorb all the fall energy or guarantee clearance from the ground or nearby obstacles. Equipment selection must account for the task and the available clearance.

Selecting a Harness for Your Team

Compare the required size, adjustment, attachment points and buckle options against the task and the manufacturer’s instructions. Appropriate training, equipment checks and a rescue plan are also needed. See the HSE’s introduction to working at height for general guidance.

For help with Trans-Web harness options, quantities and quotations, contact our team.

Choosing a fall arrest system means assessing the complete setup: anchorage, full body harness and compatible connecting equipment. This guide outlines the questions to resolve before specifying equipment for your team.

Before you look at equipment…

Start with the work-at-height risk assessment: avoid work at height where reasonably practicable, prevent falls where possible, and minimise the distance and consequences of any remaining fall risk. Consider collective protection before personal protective equipment. See the HSE guidance on working at height.

Choosing the right fall arrest system

A fall-arrest system is designed to stop a fall after it starts. The harness, anchorage and connecting equipment must work together, with suitable energy absorption and sufficient clearance. A fall arrest block is a component, not a complete system on its own.

Anchor point

Have the anchorage and supporting structure assessed for the chosen system and intended use. Follow the equipment manufacturer’s requirements for anchorage strength, position and clearance; a single strength figure or a rule based on two lanyard lengths cannot establish suitability for every setup. Account for possible swing falls and obstacles, and arrange competent advice where needed.

Full body harness

This is a mandatory requirement and a key part of a fall arrest system. A harness is made up of straps, loops, and components that allow it to be effectively fitted to the body of the person using it. It should provide support during a fall and distribute fall arrest forces as evenly as possible. The right harness will depend on factors such as the job, the environment, and the needs of the wearer.

Lanyards & Connectors

There are several different options for a fall arrest connection system. These include an energy-absorbing lanyard, a retractable type of fall arrester, and mobile fall arrestors on vertical anchor lines. Check the compatibility and instructions for each component rather than selecting them independently.

Is a fall arrest system the right option?

For the distinction between preventing access to an edge and stopping a fall, see our fall arrest vs fall restraint comparison.

Plan how a fallen worker would be rescued before work starts, and ensure the users have suitable training. Equipment inspection and maintenance are also part of the system planning.

At Trans-Web, our height safety equipment can be tailored specifically to your needs. Find out more by contacting us.

Safety harnesses have an important role when a work-at-height assessment calls for personal fall protection. They must be selected and used as part of a suitable system; wearing a harness alone does not prevent a fall.

When are safety harnesses necessary?

The need for a harness depends on the task, workplace and protective measures selected. Not every task at height requires a harness. Start by considering whether work at height can be avoided and whether collective protection, such as guardrails, can prevent a fall.

Where personal protection is required, the setup may prevent the worker reaching a fall hazard or arrest a fall after it starts. Our fall arrest vs fall restraint guide explains that distinction.

What are the legal requirements for safety harnesses?

There is no general 6 ft threshold below which work-at-height risks can be ignored. The Work at Height Regulations 2005 apply where a fall could cause personal injury. The appropriate precautions follow from the risk assessment, rather than a blanket rule that everyone working at height must wear a harness. See the HSE’s work-at-height FAQs for guidance on duties, planning and equipment selection.

How do safety harnesses help protect workers?

A full body fall-arrest harness supports the wearer and distributes forces when the complete system arrests a fall. Protection depends on correct fit, designated attachment points, compatible connecting equipment and suitable anchorage. Users need appropriate training, and the equipment must be inspected and maintained according to its instructions and the inspection arrangements for the work.

For product features and a Trans-Web example, read our fall arrest harness features guide.

To discuss Trans-Web height safety equipment or request a quotation for your project, contact us.