Choosing the Right Fall Arrest System – A Comprehensive Guide

Choosing a fall arrest system means assessing the complete setup: anchorage, full body harness and compatible connecting equipment. This guide outlines the questions to resolve before specifying equipment for your team.

Before you look at equipment…

Start with the work-at-height risk assessment: avoid work at height where reasonably practicable, prevent falls where possible, and minimise the distance and consequences of any remaining fall risk. Consider collective protection before personal protective equipment. See the HSE guidance on working at height.

Choosing the right fall arrest system

A fall-arrest system is designed to stop a fall after it starts. The harness, anchorage and connecting equipment must work together, with suitable energy absorption and sufficient clearance. A fall arrest block is a component, not a complete system on its own.

Anchor point

Have the anchorage and supporting structure assessed for the chosen system and intended use. Follow the equipment manufacturer’s requirements for anchorage strength, position and clearance; a single strength figure or a rule based on two lanyard lengths cannot establish suitability for every setup. Account for possible swing falls and obstacles, and arrange competent advice where needed.

Full body harness

This is a mandatory requirement and a key part of a fall arrest system. A harness is made up of straps, loops, and components that allow it to be effectively fitted to the body of the person using it. It should provide support during a fall and distribute fall arrest forces as evenly as possible. The right harness will depend on factors such as the job, the environment, and the needs of the wearer.

Lanyards & Connectors

There are several different options for a fall arrest connection system. These include an energy-absorbing lanyard, a retractable type of fall arrester, and mobile fall arrestors on vertical anchor lines. Check the compatibility and instructions for each component rather than selecting them independently.

Is a fall arrest system the right option?

For the distinction between preventing access to an edge and stopping a fall, see our fall arrest vs fall restraint comparison.

Plan how a fallen worker would be rescued before work starts, and ensure the users have suitable training. Equipment inspection and maintenance are also part of the system planning.

At Trans-Web, our height safety equipment can be tailored specifically to your needs. Find out more by contacting us.