 Stirling energy absorbing lanyard Code SL 1
A fall arrest webbing lanyard complete with a highly efficient tear web energy absorber, that in the event of a fall, would reduce forces on the body to well below the 6kn required by the European Standard. It is used to connect the user’s safety harness to an approved anchor point.
Features:➢ 50mm wide coated polyester webbing
➢ Integral energy absorber
➢ Standard length of 2 metres including karabiners
➢ Shorter lengths available
This lanyard can also be supplied permanently attached to the safety harness.
Alternative anchor filling can be supplied.
 Harlech energy absorbing lanyard Code HL 1
A two-legged fall arrest webbing lanyard designed to ensure that one let of the lanyard is always attached to an anchor point, whilst the user mover round obstacles or from one work area to another.
Features:➢ 50mm wide coated polyester webbing
➢ Integral energy absorber
➢ Standard length of 2 metres including karabiners
➢ Shorter lengths available
This lanyard can also be supplied permanently attached to the safety harness.
Alternative anchor filling can be supplied.
 Conway energy absorber Code CEA1
A highly efficient tear web energy absorber which can be used in areas where a short safety connection is required.
Features:
➢ 50mm wide coated polyester webbing
➢ Approximately 380mm long
Alternative anchor filling can be supplied.
 Mini block retractable webbing lanyard Code MB 1
A lightweight, compact refractable lanyard 2.5 metres long when extended, c/w screwgate karabiner each end.
Features:➢ Immediate locking in the event of a fall
➢ 45mm high visibility coated webbing
➢ In line energy absorber
➢ PVC cover fitted to block
Extremely useful retractable lanyard, to be used in situations where a loose lanyard may impede the user.
All blocks are labelled with individual serial numbers, packed in polythene carrying bags complete with ‘Instructions for safe use’ and ‘Inspection records’ card.
Manufactured in the UK to BS EN 360.
 Warwick restraint lanyard Code WL 1
This lanyard has no energy absorbing capabilities and therefore MUST NOT BE USED TO ARREST A FALL.
Features:➢ 35mm wide polyester coated webbing
➢ Standard length 1.85 metres
➢ Alternative anchor fittings can be used
All lanyards are labelled with individual serial numbers and are supplied with ‘Instructions for safe use’ and ‘Inspection record’ card.
Manufactured in the UK to BS EN 354.
|
